Are You Ready for Winter Driving?

Stay safe this winter with these important tips from Merrimack Auto Center in Nashua & Merrimack, NH!

We are well into fall here in Merrimack and Nashua, NH, and winter weather is just around the corner! Get ready for winter driving with these simple winter maintenance tips:

Inspect Your Tire Tread & Check Tire Pressure 
Be sure to check your tire tread depth. Make sure you have at least 2/32″ of depth for best tire performance.  It is also important to check tire pressure. This should be done on a regular basis, but it is especially imperative to check tire pressure before winter arrives. Remember to also check your spare – you never know when you’ll need it.

Make Sure Your Antifreeze Tank Is Full
It is important to maintain a full tank with a 50/50 mix of water and antifreeze. Clean, quality antifreeze will deliver the winter protection your vehicle needs.

Test and Inspect Your Battery
Extreme cold temperatures can degrade car batteries internally and accelerate the rate of battery terminal corrosion. This will lead to a battery that is more likely to die. Don’t risk getting stranded! Check your battery cables to make sure they are clean and firmly attached to the terminals.

Check Your Washer Fluid & Wipers
We use much more washer fluid in the winter, when dirty slush and snow continually hit the windshield. Keep the washer fluid tank full. Choose a winter cleaning formula that contains sufficient antifreeze ingredients to keep it from freezing. Also, be sure that your wipers are in decent shape to do their job. The blades should make full contact with the glass to thoroughly clean it. Consider installing winter wiper blades that wrap the blade frame in a rubber boot to reduce ice and snow buildup, and promote good contact between the blade and the glass.

Once you have take these maintenance steps, you will be ready to face the ice and snow. Most importantly, in seriously hazardous winter driving conditions, remember to take it slowly and drive safely!

Subscribe to Our Blog!

"*" indicates required fields

This field is for validation purposes and should be left unchanged.